Thinner PH 400 for Universal

Overview

Solvent thinner, cleaner.

Purpose

Thinner for all purposes, especially for epoxies, polyurethanes, acrylics, and upgrade alkyd primers.

Properties

Color: Clear

Solids: 0 ± 0%

Flashpoint: > 25°C

VOC: 7,05 lbs/gal (856 gms/ltr) USA-EPA Method 24

Storage

Circa 24 months at 20°C, stored in dry, shaded and ventilated conditions. The container must be kept sealed and away from heat and ignition.

Pack Size

5 Gal. (18,9 Lit) drum, 1 Gal (3,785 Lit) drum, 20 Lit drum

Health and Safety

Prior to use, obtain, consult and follow the Material Safety Data Sheet for this product concerning health and safety information. Read carefully and conform to precautions on MSDS and packing vessels. To avoid eye and skin contact, tools such as gloves, goggles and face mask etc. should be used during work with product (proper safety measures should be taken according to construction methods and circumstances). All work with the product must be carried out according to all relevant national health, safety and environment standards and codes. This product is for professional use only.

Limitation of liability

All information is given for guidance only and is subject to regional variation depending upon local climate and environmental condition. An excessive film thickness delays the final curing and creates sagging. Over coating interval will increase with the number of paint layers and the thickness of the paint film. For recommended paints at special circumstances, please consult with our Phila Coatings (USA) Inc. Apply in good weather. The relative humidity must not exceed 80% temperature of the surface to be coated must be at least 3°C above the dew point. All data from the tests is obtained under lab conditions, so Phila Coatings (USA) Inc. won’t bear any liabilities from the condition whether the data could reflect the objective status of the actual application circumstance or not.

Disclaimer

The information in the product manual is based on our experiences from tests and practice. For the application without our knowledge, we could only make sure that our products themselves are warranted. We may modify the data in this product manual according to our continuous development and experience accumulation without advanced notice.